Solo™
12-06-2006, 10:21 AM
Hi there people!
Im currently using Motorola Razr V3x with Globe Telecom. And Im pretty aware that using 3G functions are not that Easy for Motorola Users. So, let me go ahead and Start something that hopefully will be helpful the rest of the Guys out there.
Let me begin:
Well, after a day of posting, no one seems to have the answer to my Question...Not even the Globe People!
Anyway, after tons of experimentations and thinking made, I finally able to do a Walk-around for using my Motorola v3x for Streaming Live TV! - And, Im sharing it to everyone!
The Moto Situation:
Motorola Phones come with Pre-Installed Web Sessions for WAP, GPRS, and MMS Access. There is only One Available Space in the Web Sessions for a New Setting to be configured or Installed.
That's the main reason why I can't have myGlobe Connect, myGlobe MMS, and myGlobe Stream all at the same time!
And finally, I found a fix to that!
1. Go to your Web Sessions and make sure you still have the available space to Add a New Entry. If not, try to delete the one you manually configured.
2. Write a New Message and Key-in STREAM then send it to 2951. Wait for the Text Advisory from Globe and Install the STREAM settings that will be sent to your Phone. Remember to Set it as a Default Access (at least for now).
:cool: Note: If you have the Remaining Space in the Web Session, you should be able to Install the Settings you will receive from Globe. If not, Go back to Web Sessions and Delete the Settings you Manually Configure!
3. Now, Go to Web Sessions again and Select ANY of the Pre-Installed Settings and select Options -> Edit.
4. Edit Each Fields with the Parameters Below. (Note: You cannot Edit the Web Session's Name - But that's not a Problem):
myGlobe GPRS Manual Config for Motorola v3x:
:icon_eyes: Let's say you selected Celcom WAP
Homepage: http(colon)//www(dot)globe(dot)com(dot)ph/globe(dot)wmlc
Service Type 1: WAP
Proxy 1: 203.177.042.214
Port 1: 9210
Service 2: WAP
Port 2: 9210
DNS 1: 000.000.000
DNS 2: 000.000.000
Speed: 9600
Line Type 1: ISDN
Speed 2: 9600
Line Type 2: ISDN
GPRS Application: www(dot)globe(dot)com(dot)ph
*Click Done
myGlobe MMS Manual Config for Motorola v3x:
:icon_eyes: Let's say you selected Celcom MMS
Homepage: http(colon)//192(dot)409dot)100(dot)22(colon)10021/mmsc
Service Type: WAP
Proxy 1: 192.40.100.20
Port 1: 9201
Service Type 2: WAP
Port 2: 9210
DNS 1: 000.000.000
DNS 2: 000.000.000
Speed: 9600
Line Type 1: ISDN
Speed 2: 9600
Line Type 2: ISDN
GPRS Application: mms(dot)globe(dot)com(dot)ph
*Click Done
5. Now, go to Messages -> Options -> Setup -> Message Setup. Select Multimedia Message Setup and select Server Info.
6. You may see Maxim checked as your default MMS Server. We can change that and Name it to anything that you desire! Select Options -> Delete. Do this to delete all 3 Server Names under Server Info.
:cool: Note: At this Point, you should see Service1, Service2, and Service3.
7. Go to Options then Select New. Enter the following Parameters:
Service Name: anything you like
Server Name: http(colon)//192(dot)40(dot)100(dot)22(colon)10021/mmsc
Web Session: Celcom MMS (Remember that this is what you selected in this Example. This is where we manually configured the myGlobe MMS settings)
*Click Done
8. Now, you are almost there! Go go Web Access and select Web Shortcuts.
9. Create Web Shortcuts for these Streaming Uniform Resource Locator:
ABS-CBN 2: rtsp://203.177.154.141/rtpencoder/ABSCBN.sdp
GMA 7: rtsp://203.177.154.141/encoder/gma7.rm (This one doesnt seem to work. I get an Error Message saying "File Type Not Recognized". If you know the correct URL for this, please email me at solo.villanda@hotmail.com)
CNN: rtsp://203.177.154.141/encoder/gmacnn.rm
:thumbsup: Now, Remember! You will need to select myGlobe Stream in the Web Sessions as a Default everytime you want to watch TV! This will serve as your Access Point! Once this is selected as Default, go to Web Shortcuts and select your TV Station!
Also, Remember to go to Web Sessions and select which one you manually configured the myGlobe GPRS ( in this example, its the Celcom WAP) and set is as Default everytime you want to Access myGlobe WAP and other WAP sites!
I hope this will Help my Moto-Brothers and Sisters out there!
For Comments and Violent Reactions, Just post your Response here
Im currently using Motorola Razr V3x with Globe Telecom. And Im pretty aware that using 3G functions are not that Easy for Motorola Users. So, let me go ahead and Start something that hopefully will be helpful the rest of the Guys out there.
Let me begin:
Well, after a day of posting, no one seems to have the answer to my Question...Not even the Globe People!
Anyway, after tons of experimentations and thinking made, I finally able to do a Walk-around for using my Motorola v3x for Streaming Live TV! - And, Im sharing it to everyone!
The Moto Situation:
Motorola Phones come with Pre-Installed Web Sessions for WAP, GPRS, and MMS Access. There is only One Available Space in the Web Sessions for a New Setting to be configured or Installed.
That's the main reason why I can't have myGlobe Connect, myGlobe MMS, and myGlobe Stream all at the same time!
And finally, I found a fix to that!
1. Go to your Web Sessions and make sure you still have the available space to Add a New Entry. If not, try to delete the one you manually configured.
2. Write a New Message and Key-in STREAM then send it to 2951. Wait for the Text Advisory from Globe and Install the STREAM settings that will be sent to your Phone. Remember to Set it as a Default Access (at least for now).
:cool: Note: If you have the Remaining Space in the Web Session, you should be able to Install the Settings you will receive from Globe. If not, Go back to Web Sessions and Delete the Settings you Manually Configure!
3. Now, Go to Web Sessions again and Select ANY of the Pre-Installed Settings and select Options -> Edit.
4. Edit Each Fields with the Parameters Below. (Note: You cannot Edit the Web Session's Name - But that's not a Problem):
myGlobe GPRS Manual Config for Motorola v3x:
:icon_eyes: Let's say you selected Celcom WAP
Homepage: http(colon)//www(dot)globe(dot)com(dot)ph/globe(dot)wmlc
Service Type 1: WAP
Proxy 1: 203.177.042.214
Port 1: 9210
Service 2: WAP
Port 2: 9210
DNS 1: 000.000.000
DNS 2: 000.000.000
Speed: 9600
Line Type 1: ISDN
Speed 2: 9600
Line Type 2: ISDN
GPRS Application: www(dot)globe(dot)com(dot)ph
*Click Done
myGlobe MMS Manual Config for Motorola v3x:
:icon_eyes: Let's say you selected Celcom MMS
Homepage: http(colon)//192(dot)409dot)100(dot)22(colon)10021/mmsc
Service Type: WAP
Proxy 1: 192.40.100.20
Port 1: 9201
Service Type 2: WAP
Port 2: 9210
DNS 1: 000.000.000
DNS 2: 000.000.000
Speed: 9600
Line Type 1: ISDN
Speed 2: 9600
Line Type 2: ISDN
GPRS Application: mms(dot)globe(dot)com(dot)ph
*Click Done
5. Now, go to Messages -> Options -> Setup -> Message Setup. Select Multimedia Message Setup and select Server Info.
6. You may see Maxim checked as your default MMS Server. We can change that and Name it to anything that you desire! Select Options -> Delete. Do this to delete all 3 Server Names under Server Info.
:cool: Note: At this Point, you should see Service1, Service2, and Service3.
7. Go to Options then Select New. Enter the following Parameters:
Service Name: anything you like
Server Name: http(colon)//192(dot)40(dot)100(dot)22(colon)10021/mmsc
Web Session: Celcom MMS (Remember that this is what you selected in this Example. This is where we manually configured the myGlobe MMS settings)
*Click Done
8. Now, you are almost there! Go go Web Access and select Web Shortcuts.
9. Create Web Shortcuts for these Streaming Uniform Resource Locator:
ABS-CBN 2: rtsp://203.177.154.141/rtpencoder/ABSCBN.sdp
GMA 7: rtsp://203.177.154.141/encoder/gma7.rm (This one doesnt seem to work. I get an Error Message saying "File Type Not Recognized". If you know the correct URL for this, please email me at solo.villanda@hotmail.com)
CNN: rtsp://203.177.154.141/encoder/gmacnn.rm
:thumbsup: Now, Remember! You will need to select myGlobe Stream in the Web Sessions as a Default everytime you want to watch TV! This will serve as your Access Point! Once this is selected as Default, go to Web Shortcuts and select your TV Station!
Also, Remember to go to Web Sessions and select which one you manually configured the myGlobe GPRS ( in this example, its the Celcom WAP) and set is as Default everytime you want to Access myGlobe WAP and other WAP sites!
I hope this will Help my Moto-Brothers and Sisters out there!
For Comments and Violent Reactions, Just post your Response here